How to Make a Cat Hammock

Cats Love Hammocks
Cat hammocks are a wonderful accessory you can buy or make that will enhance the life of any cat. As you can see from the photo above, cats truly enjoy hanging out in a hammock.

The cat hammock pictured above was sewn by me, and it's a very easy DIY project. In this article, I'll share with you the steps needed to make a rectangular cat hammock. And for those of you too busy to sew, there are cat hammocks already made which will please many a feline furkid.

My cat hammock design was based largely on a PDF pattern made available through the website petacc.com. Their pattern was for a square-shaped hammock and is no longer available online; however, I am sharing here on this page details to make a rectangular-shaped hammock for the cats.

The dimensions I used to create a large cat hammock, and a smaller cat hammock was garnered on the needs of the animal rescues and shelters I work with. The measurements for these rectangular-shaped hammocks I'll give you below will work on the standard variety of wire cages made for cats and dogs.

Two-Sided Reversible Hammock

Tips for Making Cat Hammocks
As you will see in the picture above, I like to use two different fabrics to make a cat hammock. On one side I may use an indoor/outdoor fabric which is sturdy and easy to clean or pieces of denim pant legs sewn together. You can also use an old wool blanket or terry towel for the other side of the cat hammock.
You can also make both sides out of the same fabric or toweling. It is entirely up to you. Either way, the completed hammock is reversible which is ideal!
When choosing the fabric, just keep it soft, washable, and sturdy. Cats do not care about colors, just comfort.

Materials You Will Need to Make a Cat Hammock
Thread, scissors, and a medium-weight sewing machine needle.
I purchase my mattress pad covers from the local thrift shop as padding to line my hammocks and also to line the cat cage quilts I make for the Humane Society.
Polypro webbing for corner straps. For each hammock, you need a total of 60" in length (4 sections cut at 15" each)

Step 1: Cut the Fabric
For each hammock, cut two equally-sized fabric pieces to make either the large or the small/medium hammock.
Cut one equally sized piece of padding
Sizes to cut: 27" x 17 1/2" for Large or 22" x 13 1/2" for Small/Medium

Step 2: Add the Corner Tabs to the Fabric
The picture above is actually of one of my corner hammocks, but the method of attaching the corner straps are the same. Only the placement of the straps is different. Here's what I mean:

Decide which of the two main fabric pieces you want to attach the tabs too.
Take one 15" length of webbing, fold in half, pin the open ends together catty-corner to one of the four corners of the rectangular piece. (Note the folded middle section of the strap is facing inside the fabric piece. This is important as we need it to be enclosed inside when we sew the layers together in the next step.)
Sew in a straight stitch back and forth several times to reinforce the strap.
Repeat until all four straps are secured in place.

Step 3: Layer the Fabric
As in the picture above, with right sides together you want to make a "sandwich" of the fabric before sewing. As so:

First Layer: Place fabric face side up (this piece will already have the sewn straps in the corners facing up. Again make sure the folded strap is inside the "sandwich")
Second layer: Other fabric, with right side facing the previous layer (means the wrong side is facing you)
Third layer: Padding so the padding will be on top.
Finally: Pin the layers together.

Step 4: Sew the Layers Together
Begin sewing halfway along one of the longer sides of the rectangle leaving a 6 inch opening for turning once the layers are sewn together. Stitch in a straight line 5/8 inch from the edge. I prefer a 5/8 inch seam allowance. These hammocks will be washed and dried frequently and this larger seam allowance allows for that.
When you come to each corner, swivel the sewing foot so you are encasing the corner strap with a diagonal stitch across the corner.
Continue sewing around all four sides, making sure there is 6 inch opening for turning.
Insert hand inside the hammock and turn right side out. You can now tug each sewn corner strap into place.

Step 5: Stitch the Opening
The last step is to slip stitch the opening closed. You're done!

  • Mar 07, 2019
  • Category: News
  • Comments: 0
Leave a comment